1000V Digital Handheld True RMS Megger Insulation Resistance Meter Tester Multimeter Ohm Voltmeter UNI T UT505A Megohmmeter

1000V Digital Handheld True RMS Megger Insulation Resistance Meter Tester Multimeter Ohm Voltmeter UNI T UT505A Megohmmeter
  • Продавецwww.philadelphiaeaglesvscarolinapanthers.us
  • Список ценUS $125.21piece
  • Продажная ценаUS $125.21piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,1 (559)

Oписание продукта

AT518 Portable DC Milliohm Resistance Meter Tester ,10 Micro~20M Ohm, Low Ohm Meter,Micro Ohm Meter

AT518 handheld DC milliohm meter is the use of high-performance processors and 3.5" TFT LCD screen smart handheld Meter. Accurate and convenient measurements of passive-components can be achieved in all occasions for a long time. Wide Measurement Range from 10 to 20M, and 20000 readers. It can guarantee 0.05% accuracy, even in the condition of the testing speed under 15t/s. its unique current testing mode can adapt different testing. To apply to long distance control, DAQ and analysis, AT518 is equipped with Mini-USB interface.
AT518 can test all kinds of high-ohm, medium-ohm, low-ohm tester; switch connect, connector contact, relay coil and contact resistance; Transformer, Inductor, motor, deflection coil winding resistance, wire resistance; The metal winding resistance of vehicle, vessels, and airplane; PCD line and hole, etc.

-Gorgeous dual-colure cast shell
-Battery and external power supply
-Automatic power off Function
-ABS/ PER/SEQ comparison criteria
-Comparator Function: GD/NG Show
-3.5 inches, Truecolor 16M, TFT-LCD Display
-Auto Zero-Adjust for each range
-Four-terminal resistance measurement.
-Mini-USB interface
-SCPI compatible command sets
-Keypad lock function
-Switch both in English and Chinese.
-Background-lightness adjustment function
-Automatic shutdown set
-Size 210.76mm (Length)*130.23mm (Width)*37.88mm (Heigth)
-Weight: 500g
-Battery: 8.4V, Li, 2200mAh, chargeable
-Max power: 5W
-Battery capacity: Over 8 hours continuous use

-All kinds of low, medium, high resistor
-Switch contact resistance
-Enamel-insulated wire resistance
-Connector Contact
-Relay/switch connector contacts
-Transformer, Inducer, Motor, Deflection Coil winding resistance
-Welding Spot
-Wire resistance
-Metal riveting resistance of vehicle, vessels, airplane
-Pure resistance
-The resistance of motor and transformer
-Printed board line and hole resistance
-Low resistance character of Electromechanical Components

ParameterDC Resistance
Measurement Range10-20M
Measurement currentI-Max: <1A Current Mode: high current, low current
RangeAuto, manual, nominal with 10 ranges
Speed30 t/s15t/s3t/s
DisplayABS, PER, SEQ compare way
Display Max20000
AdjustmentShort-circuit Zero-Adjust for each range
ComparatorBuild-in sorting record, GD/NG sorting result display
TriggerInternal, Manual, Remote
InterfaceBuild-in Mini-USB Interface(VCP)
Temperature compensationAccuracy: 0.2 C Measurement Range: 0-80C
Method4 Terminal(2 sense 2 drive)
Power AdaptorInput: 100-240V~50/60Hz 0.35A Output: 9V 1A DC 8.4V, Li2200mAh Rechargeable Battery
Dimension & WeightOutside(mm): 130.23 (Width)x210.76(Height)x37.88 (Depth) 650g
AccessoriesATL501B: Four-terminal Kelvin Test Clip ATL909: DC resistance adaptor ATL202: Carrying Case ATL804: Li- battery ATL105: Mini-USB communicable cable ATL501C: Four-terminal test Probe ATS518 data acquisition software
OthersTFT-LCD display; Keypad lock; Data hold; Adjustable background light; Auto power off; Switch in both Chinese and English;