936Power 110V 220V Electric Soldering Station SMD Rework Welding Iron With Stand

936Power 110V 220V Electric Soldering Station SMD Rework Welding Iron With Stand
  • Продавецwww.philadelphiaeaglesvscarolinapanthers.us
  • Список ценUS $25.07piece
  • Продажная ценаUS $25.07piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,7 (123)

Oписание продукта

3 in 1 Soldering Station Soldering/Hot Air Gun Rework Station Soldering Iron+Hot Air Gun+Power Supply High Quality SAIKE 909D
1, SAIKE909D is based on market needs and designed a three in one versatile tool equipment, which brings together in one common tool (welding sets, air guns, mobile phone repair power supply), three functions can be used independently or simultaneously switch, takes less work surfaces, utility and energy conservation, and in the performance of single-function products on the market have further enhanced.
2, the product uses double-sided fiberglass circuit board material, the patch process. Neatly within the process, the signal flow clear.
3, iron, air gun and power supply independent dual-core micro-controller, and the brightest to work independently, even if there are problems along the way does not affect the normal operation of other dual-core CPU designs greatly reduce the failure rate of products
4, fan air capacity, adjustable non-polar, iron, air gun temperature, supply voltage display terminal through the three-way LED Display
5, iron, air gun using Intelligent Fuzzy PID temperature control areas, the temperature stability of error is small, temperature compensated quickly, can adapt to harsh environments.
6, air gun, soldering iron with a variety of fault protection;
7, the power part of the recovery with continuous protection and RF protection, to avoid the interference of all kinds of unexpected phenomenon of burning mobile phone
8, the product can not only maintain power as a mobile phone, mobile phone also can detect the RF signal strength, and through the LED indicator shows the strength of RF signals
9, the product is simple to operate without any switch button when finished.
Technical parameters 
Rated Voltage: AC: 220V ± 10% 50HZ
Total Power: 700W +50 W +15 W = 765W ± 10% (max)
Work environment :0-50 °c
Storage temperature: -20-80 °c
Iron parts: 
Output Voltage: AC: 26V ± 10%
Output Power: 50W ± 10%
Temperature range: 200 -480 °c
Temperature Stability: ± 2 °c
Tip to ground resistance <2ohm
Tip to ground voltage <2mV
Hot air gun parts: 
Operating voltage: AC: 220V ± 10% 50HZ
Output Power: 700W ± 10%
Temperature range: 100 -480 °c
Temperature Stability: ± 2 °c
Air output: 120L/min (The MAX.
Power supply:
Operating voltage: AC: 220V ± 10% 50HZ
Output Power: 15W
Output voltage :0-15V
Load: <0.01 ± 2mv
Recovery time: <100us
Ripple noise <1mvrms (RMS virtual value)
Temperature Coefficient: <300PPm / °c
Protection start current:> 10% of the nominal value