Power Kit! CNC Wantai 3 Axis Nema 23 Stepper Motor Dual Shaft 57BYGH115 003B 425oz+Driver DQ542MA 50V 4.2A 128Micro Foam Metal

Power Kit! CNC Wantai 3 Axis Nema 23 Stepper Motor Dual Shaft 57BYGH115 003B 425oz+Driver DQ542MA 50V 4.2A 128Micro Foam Metal
  • Продавецwww.philadelphiaeaglesvscarolinapanthers.us
  • Список ценUS $194.75piece
  • Продажная ценаUS $194.75piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,5 (674)

Oписание продукта

 

4 23HS2430

 

free  ship  to many  EU country !!

 

Package include:

   

 4PCS 23HS2442B 4- lead Nema 23 stepper motor 4250z.in, 4.2A withdual shaht length of front axle21mm, back 15mm;diameter of front axle 8mm,back 6.35mm 

 

4pcs driver DM542  18-50VDC, PEAK CURRENT 4.2A,128 microstep

 

​2pc   350w,  36v  power supply

 

 gift : 1pc  6axis brekaout board & 1 pc Parallel cable

 

 

012

 

 

 

 

 

 

 

 23HS2442B

imageimage

3Axis 4-LEAD Nema 23 Stepper Motor 270oz-in,3A,76mm CNC Mill Control 50VDC/4.2A/128Mric

Manual of 2-phase hybrid stepper motor driver DM542

Introduction:

  DM542 is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 24VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kindswith 42mm to 86mm outside diameter and less than 4.0A phase current.This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM542 run under high speed is also significantly higher than the other two-phase driver, what is more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, Computer embroider machine, packing machines and so on.

Features:

l  High performance, low price

l  Average current control, 2-phase sinusoidal output current drive

l  Supply voltage from 24VDC to 50VDC

l  Opto-isolated signal I/O

l  Overvoltage, under voltage, overcorrect, phase short circuit protection

l  15 channels subdivision and automatic idle-current reduction

l  8 channels output phase current setting

l  Offline command input terminal

l  Motor torque is related with speed, but not related with step/revolution

l  High start speed

l  High hording torque under high speed

Electrical specification:

Input voltage

24-50VDC

Input current

< 4A

Output current

1.0A~4.2A

Consumption

Consumption:80W;  Internal Insurance:6A

Temperature

Working Temperature -10~45oc;

Stocking temperature -40oc~70oc

Humidity

Not condensation, no water droplets

gas

Prohibition of combustible gases and conductive dust

weight

200G

 

 

The first three bits (SW 1, 2, 3)of the DIP switch are used to set the dynamic current. Select a setting

Closest to your motor is required current 

Output current (A)

SW1

SW2

SW3

PEAK

RMS

ON

ON

ON

1.00

0.71

OFF

ON

ON

1.46

1.04

ON

OFF

ON

1.91

1.36

OFF

OFF

ON

2.37

1.69

ON

ON

OFF

2.84

2.03

OFF

ON

OFF

3.31

2.36

ON

OFF

OFF

3.76

2.69

OFF

OFF

OFF

4.20

3.00

 

4) Semi-flow function:

Semi-flow function is that there is not step pulse after 500 ms, the driver output current automatically reduced to 70% of rated output current, which is used to prevent motor heat.

4. Power connections

(1)+ v ,GND:Power Supply.

   +V: Power supply, 16~50 VDC, Including voltage fluctuation and EMF voltage. The max current is 5A.

(2) A+  A-  B+  B-:Connecting 2 phase stepper motors.

The driver & 2-phase hybrid stepping motor use four-wire connection, the motor can be connected in parallel & series bipolar. As for bipolar connection, it is higher performance with high-speed, but the current of driver is larger (it is 1.73 times more than the motor  winding current).
Connecting in series, the driver \'s  current is equal to the motor winding one.

we ship worldwide!

 

3Axis 4-LEAD Nema 23 Stepper Motor 270oz-in,3A,76mm CNC Mill Control 50VDC/4.2A/128Mric

3Axis 4-LEAD Nema 23 Stepper Motor 270oz-in,3A,76mm CNC Mill Control 50VDC/4.2A/128Mric

 

 

 

350-36

 

 

Breakout board:

 

3Axis 4-LEAD Nema 23 Stepper Motor 270oz-in,3A,76mm CNC Mill Control 50VDC/4.2A/128Mric

Description:
? Built in DB25 male connector.
? DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
? DB25 Input Pin: P10,P11,P12,P13,P15.
? DB25 GND Pin: P18-P25.
? Power supply: +5V DC.
? Built in C-class Optical-coupler.
? High quality with Surface-mount Tech.

 

 

3Axis 4-LEAD Nema 23 Stepper Motor 270oz-in,3A,76mm CNC Mill Control 50VDC/4.2A/128Mric

 

 image

 

 

 

 

 

 

 

 

 

3Axis 4-LEAD Nema 23 Stepper Motor 270oz-in,3A,76mm CNC Mill Control 50VDC/4.2A/128Mric

Manual of 2-phase hybrid stepper motor driver DM542

Introduction:

  DM542 is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 24VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kindswith 42mm to 86mm outside diameter and less than 4.0A phase current.This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM542 run under high speed is also significantly higher than the other two-phase driver, what is more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, Computer embroider machine, packing machines and so on.

Features:

l  High performance, low price

l  Average current control, 2-phase sinusoidal output current drive

l  Supply voltage from 24VDC to 50VDC

l  Opto-isolated signal I/O

l  Overvoltage, under voltage, overcorrect, phase short circuit protection

l  15 channels subdivision and automatic idle-current reduction

l  8 channels output phase current setting

l  Offline command input terminal

l  Motor torque is related with speed, but not related with step/revolution

l  High start speed

l  High hording torque under high speed

Electrical specification:

Input voltage

24-50VDC

Input current

< 4A

Output current

1.0A~4.2A

Consumption

Consumption:80W;  Internal Insurance:6A

Temperature

Working Temperature -10~45oc;

Stocking temperature -40oc~70oc

Humidity

Not condensation, no water droplets

gas

Prohibition of combustible gases and conductive dust

weight

200G

 

 

The first three bits (SW 1, 2, 3)of the DIP switch are used to set the dynamic current. Select a setting

Closest to your motor is required current 

Output current (A)

SW1

SW2

SW3

PEAK

RMS

ON

ON

ON

1.00

0.71

OFF

ON

ON

1.46

1.04

ON

OFF

ON

1.91

1.36

OFF

OFF

ON

2.37

1.69

ON

ON

OFF

2.84

2.03

OFF

ON

OFF

3.31

2.36

ON

OFF

OFF

3.76

2.69

OFF

OFF

OFF

4.20

3.00

 

4) Semi-flow function:

Semi-flow function is that there is not step pulse after 500 ms, the driver output current automatically reduced to 70% of rated output current, which is used to prevent motor heat.

4. Power connections

(1)+ v ,GND:Power Supply.

   +V: Power supply, 16~50 VDC, Including voltage fluctuation and EMF voltage. The max current is 5A.

(2) A+  A-  B+  B-:Connecting 2 phase stepper motors.

The driver & 2-phase hybrid stepping motor use four-wire connection, the motor can be connected in parallel & series bipolar. As for bipolar connection, it is higher performance with high-speed, but the current of driver is larger (it is 1.73 times more than the motor  winding current).
Connecting in series, the driver \'s  current is equal to the motor winding one.

we ship worldwide!

 

3Axis 4-LEAD Nema 23 Stepper Motor 270oz-in,3A,76mm CNC Mill Control 50VDC/4.2A/128Mric

3Axis 4-LEAD Nema 23 Stepper Motor 270oz-in,3A,76mm CNC Mill Control 50VDC/4.2A/128Mric

 

 

 

350-36

 

 

Breakout board:

 

3Axis 4-LEAD Nema 23 Stepper Motor 270oz-in,3A,76mm CNC Mill Control 50VDC/4.2A/128Mric

Description:
? Built in DB25 male connector.
? DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
? DB25 Input Pin: P10,P11,P12,P13,P15.
? DB25 GND Pin: P18-P25.
? Power supply: +5V DC.
? Built in C-class Optical-coupler.
? High quality with Surface-mount Tech.

 

 

3Axis 4-LEAD Nema 23 Stepper Motor 270oz-in,3A,76mm CNC Mill Control 50VDC/4.2A/128Mric

 

 image