Single Turn Resistor 100W 10 Ohm Adjustable Taper Ceramic Disk Rheostat

Single Turn Resistor 100W 10 Ohm Adjustable Taper Ceramic Disk Rheostat
  • Продавецwww.philadelphiaeaglesvscarolinapanthers.us
  • Список ценUS $20.13piece
  • Продажная ценаUS $20.13piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,1 (800)

Oписание продукта

 

 

all-sun EM463A Analog Multimeter Portable Digital Clamp Meter Multifunctional

Tester

 

NOTE:

The package content is not included battery.

We send parcel by China Post Air, the policy is that the parcel must be not included the

battery, if it has battery, will not get through the custom.

 

 

aeProduct.getSubject()

 

 

 This meter is a rectifier type, permanent-magnet moving coil instrument designed for DC and

AC voltage, DA and AC current, resistance and temperature measurements.

This meter is a 3 3/4-digit autorange digital clamp meter designed for measuring AC leakage 

current, AC load current, DC and AV voltage, resistance, diode and continuity. It is very easy to 

operate and an ideal measurement tool.

 

SAFETY INFORMATION

The meter has been designed according to IEC-61010 concerning electronic measuring instru-

ments with a measurement category III (CAT III 500V) and Pollution degree2.

 

SPECIFICATION

Accuracy is specified for a period of one year after calibration and at 18℃ to 28℃, with relative humidity <75%.

DC Voltage: Ranges: 10V - 50V - 500V

                        Accuracy: ±3% of Full Scale

AC Voltage: Ranges: 50V-250V-500V

                        Accuracy: ±3% of Full Scale

                        Frequency Response: 50Hz to 400Hz 

DC Current: Ranges: 0.5mA-10mA-250mA

                        Accuracy: ±3% of Full Scale

AC Current: Ranges: 25A-100A-500A-1000A-2000A

                        Frequency Response: 50Hz to 60Hz

                        Accuracy: ±5% of Full Scale

Resistance: Ranges: ×1 range — 0Ω to 3kΩ, scale center at 50Ω

                                     ×100 range — 0Ω to 300kΩ, scale center at 5kΩ

                        Accuracy: 3% of arc

Temperature: Range: -20℃ to 150℃ (using the temperature probe)

                           Accuracy: 3% of arc

Jaw Opening Capability: 53mm (approx.)

Max. Measurable Conductor: φ49mm (approx.)

Battery: 1.5V battery, AAA or equivalent, 3 pieces

Standard Applied: IEC61010-1 CAT III 500V

Operating Environment: temperature: 0℃ to 40℃

                                               relative humidity: ≤75%

Storage Environment: temperature: -10℃ to 50℃

                                           relative humidity: ≤85%

  

aeProduct.getSubject()

aeProduct.getSubject()

HTB1KOuiIFXXXXXlXpXXq6xXFXXXQ -

1

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

 

 

DC Voltage

Range:10V-50V-500V

Accuracy:+/-3% of Full Scale

 

AC Voltage

Range:50 V-250V-500V

Accuracy:+/-3% of Full Scale

Frequency Response:50Hz to 400Hz

 

DC Current

Ranges:0.5mA-10Ma-250mA

Accuracy:+/-3% of Full Scale

 

AC Current

Ranges:25A-100A-500A-1000A-2000A

Frequency Response:50Hz to 60Hz

Accuracy:+/-5% of Full Scale

 

Temperature

Range:-20 to 150Celsius(using the temperature probe)

Accuracy:3% of arc

Jaw Opening Capability:53mm(approx.)

Battery:1.5V battery, AAA or equivalent, 3 pieces

Standard APPLIED: IEC61010-1 CAT III 500V

Operating Environment: Temperature: 0 to 40Celsius

                       Relative humidity:≤75%

Storage Environment:temperature:-10 to 50Celsius

                    Relative humidity: ≤85%

Size: 275x100x47mm

Weight: about 452g (including battery)

Accessories: Manual x1 piece;Test Lead x1 pair

 

 

 

aeProduct.getSubject()aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()